iiitdm.ac.in. i am a faculty from IIIITD&M , chennai.gmail.combigballofwax.co.nz, ASSIGNED, New Install, no maxreserves setting, OPAC holds failbigballofwax.co.nz, ASSIGNED, Cannot place holds in staff client← Previous day | Today | Next day → | Search | Index
All times shown according to UTC.
| Time | Nick | Message |
|---|---|---|
| 00:23 | asdasda joined #koha | |
| 00:25 | asdasda left #koha | |
| 00:35 | Jo joined #koha | |
| 00:40 | bgkriegel joined #koha | |
| 01:09 | brendan | nengard++ |
| 01:15 | pianohackr|wor1 | bye, all, cya later |
| 01:15 | pianohackr|wor1 left #koha | |
| 01:45 | bgkriegel left #koha | |
| 02:45 | * chris_n2 | thinks everyone wants to hit the "Mother Budget" :-) |
| 02:45 | chris_n2 | language is a wonderful thing at times |
| 02:46 | chris | heh |
| 02:46 | chris_n2 | @wunder 99705 |
| 02:46 | munin | chris_n2: The current temperature in Speedway, North Pole, Alaska is -25.0�C (5:41 PM AKST on December 15, 2009). Conditions: Snow. Humidity: -999%. Dew Point: -66.0�C. Windchill: -25.0�C. Pressure: 29.34 in 993.5 hPa (Falling). |
| 02:47 | chris_n2 | @wunder 28334 |
| 02:47 | munin | chris_n2: The current temperature in Dunn, North Carolina is 13.8�C (9:44 PM EST on December 15, 2009). Conditions: Scattered Clouds. Humidity: 38%. Dew Point: 0.0�C. Pressure: 29.77 in 1008.0 hPa (Rising). |
| 03:00 | brendan | @wunder 93117 |
| 03:00 | munin | brendan: The current temperature in Northwest Goleta, Goleta, California is 11.4�C (6:58 PM PST on December 15, 2009). Conditions: Mostly Cloudy. Humidity: 72%. Dew Point: 7.0�C. Pressure: 30.16 in 1021.2 hPa (Steady). |
| 03:14 | chris_n2 | g'night |
| 03:27 | Amit joined #koha | |
| 03:27 | Amit | hi brendan, chris, chris_n2 |
| 03:27 | good morning #koha | |
| 03:27 | brendan | hi amit |
| 03:28 | how's india cricket doing? | |
| 03:29 | Amit | india win against srilanka by 3 runs |
| 03:29 | india score 414 in 50 over and SL 411 in 50 over | |
| 03:29 | very interesting match | |
| 03:31 | brendan | did you see that NZ was rained out - at the end of yesterdays test |
| 03:34 | richard left #koha | |
| 04:26 | richard joined #koha | |
| 04:39 | greenmang0 joined #koha | |
| 04:46 | schuster joined #koha | |
| 04:47 | schuster | Hey all - question about git and actually using the git. |
| 04:48 | how does the software know which directory to use? or change to koha or kohaclone? when in the software interface? | |
| 04:49 | brendan | schuster - http://www.amazon.com/Version-[…]1260938858&sr=8-1 is a "ok" start |
| 04:50 | sorry that's the lame answer | |
| 04:50 | schuster | I take it that is a recommendation... ;) |
| 04:50 | brendan | :) |
| 04:51 | schuster | I now have 3.0 in one directory and 3.2 git in another so I was trying to figure out how to launch it so I can actually play with 3.2 to see if there are other things I want adjusted before it goes live. |
| 04:52 | brendan | git will keep track of everything you tell it to keep track of (with a command like git-add or git-commit) |
| 04:52 | schuster | I'll go over to the archives and dig around. |
| 04:52 | brendan | so how was the 3.0 installed -- with the tarball? |
| 04:53 | schuster | 3.0 install tarball yes. |
| 04:53 | brendan | ah... I may not be much help then -- one of those " I think I'd give a better answer with hands on" |
| 04:54 | usually I keep them (tarballs and git) separate | |
| 04:55 | schuster | Thanks anyway. I'll go look and maybe tomorrow there will be some others around. You work some odd schedules! |
| 05:08 | CGI314 joined #koha | |
| 05:12 | schuster left #koha | |
| 05:21 | CGI314 left #koha | |
| 05:25 | Jo left #koha | |
| 05:58 | Amit left #koha | |
| 06:03 | Amit joined #koha | |
| 06:22 | brendan left #koha | |
| 06:32 | CGI231 joined #koha | |
| 06:41 | CGI231 | hi anbbody out there. who could clarify my doubts on koha over linux |
| 06:45 | chris | its always better to ask your question, rather than asking about asking :-) |
| 06:50 | CGI231 | yep. i am interested in confiruing koha over linux platform. with my koha running in linux, my end users will they be able to search the catalogues from a windows machine . is this support there in koha... |
| 06:50 | chris | yes |
| 06:50 | Amit | yes u can |
| 06:50 | chris | koha is a web application |
| 06:51 | so you can access it from any computer that can run a web browser | |
| 06:51 | CGI231 | thanx for the info. things required for koha in linux...apache, mysql.. and is koha supported for all distributions of linux or is it debian support only.. |
| 06:51 | chris | it works on all |
| 06:52 | but most of/all of the developers use debian | |
| 06:52 | you are best to use whatever distro you are most familiar with | |
| 06:53 | CGI231 | ok ..i do have a debian machine.. any other issues which one may encounter when installing koha over linux... |
| 06:53 | chris | if you follow the INSTALL.debian-lenny instructions |
| 06:53 | you should be fine | |
| 06:53 | CGI231 | its a generic questions...i am downloading...i thought let me get the commonly encountered issues ..so kindly bear with the generic nature of the qeustion... |
| 06:54 | aacha ok its a read me file available with the download...right... | |
| 06:57 | chris cud u pass on ur email id if in case i want to contact u. mine is sivaselvanbiiitdm.ac.in. i am a faculty from IIIITD&M , chennai. |
|
| 06:58 | chris | the best place to contact is the koha mailing lists |
| 06:59 | then lots of people will be able to answer you | |
| 06:59 | CGI231 | ok. thanx for your info...by the way ur intro and would be glad to remain in contact with u as well... |
| 07:00 | nicomo joined #koha | |
| 07:02 | Ropuch | Morning #koha |
| 07:06 | nicomo | morning koha |
| 07:06 | morning Ropuch | |
| 07:09 | CGI231 left #koha | |
| 07:10 | Amit | heya nicomo |
| 07:11 | nicomo | hi Amit |
| 07:12 | sivab joined #koha | |
| 07:13 | Ropuch | Ji Amit, nicomo |
| 07:13 | Amit | heya ropuch |
| 07:15 | laurence joined #koha | |
| 08:06 | CGI314 joined #koha | |
| 08:08 | CGI314 | hi all! I have instaaled koha now successfuly but z39.50 search is not working |
| 08:09 | it show 'ResultsConnection failed to z3950.loc.govNothing found. Try another search.' | |
| 08:10 | how can I solve it? | |
| 08:15 | Kivutar joined #koha | |
| 08:15 | CGI314 left #koha | |
| 08:15 | hdl_laptop joined #koha | |
| 08:16 | francharb joined #koha | |
| 08:19 | chris | hdl_laptop: i fixed the labels code, and sent a patch for 3.0.x |
| 08:19 | if applied all the tests pass for 3.0.x | |
| 08:19 | http://stats.workbuffer.org/gitbuilder/ | |
| 08:20 | nahuel joined #koha | |
| 08:20 | CGI314 joined #koha | |
| 08:22 | CGI314 left #koha | |
| 08:36 | richard left #koha | |
| 08:45 | kf joined #koha | |
| 08:45 | kf | good morning koha :) |
| 08:46 | chris | hi kf |
| 08:46 | i see you got zebra going? | |
| 08:48 | paul_p joined #koha | |
| 08:51 | kf | chris: hi chris, yes :) |
| 08:51 | chris | excellent |
| 08:52 | kf | chris: next step is testing :) |
| 08:56 | chris | :) |
| 08:56 | paul_p | 'morning chris & kf |
| 08:57 | (back from Lille, in the far north of France) | |
| 08:57 | kf | morning paul_p |
| 08:57 | :) | |
| 08:57 | chris | hiya paul_p |
| 08:57 | paul_p | was very very very cold. Something like -6°C (vs +2 in Marseille) |
| 08:57 | chris | that is very cold |
| 08:57 | imp | sounds like the weather we've got in hannover right now |
| 09:10 | kf | @wunder Konstanz |
| 09:10 | munin | kf: The current temperature in Taegerwilen, Germany is -3.1�C (10:00 AM CET on December 16, 2009). Conditions: Light Snow. Humidity: 85%. Dew Point: -5.0�C. Windchill: -3.0�C. Pressure: 29.89 in 1012.1 hPa (Steady). |
| 09:11 | chris | @wunder wellington, nz |
| 09:11 | munin | chris: The current temperature in Wellington, New Zealand is 14.0�C (10:00 PM NZDT on December 16, 2009). Conditions: Partly Cloudy. Humidity: 72%. Dew Point: 9.0�C. Pressure: 30.09 in 1019 hPa (Rising). |
| 09:12 | paul_p | @wunder Marseille, france |
| 09:12 | munin | paul_p: The current temperature in Marseille, France is 1.0�C (10:00 AM CET on December 16, 2009). Conditions: Clear. Humidity: 60%. Dew Point: -6.0�C. Windchill: -5.0�C. Pressure: 29.77 in 1008 hPa (Steady). |
| 09:12 | paul_p | @wunder Lille, france |
| 09:12 | munin | paul_p: The current temperature in Lille, France is -4.0�C (10:00 AM CET on December 16, 2009). Conditions: Mostly Cloudy. Humidity: 93%. Dew Point: -5.0�C. Windchill: -6.0�C. Pressure: 29.95 in 1014 hPa (Steady). |
| 09:13 | Ropuch | @wunder Wroclaw |
| 09:13 | munin | Ropuch: The current temperature in Wroclaw Ii, Poland is -5.0�C (10:00 AM CET on December 16, 2009). Conditions: Light Snow. Humidity: 65%. Dew Point: -8.0�C. Pressure: 29.97 in 1015 hPa (Falling). |
| 09:13 | Ropuch | Gotcha! ;> |
| 09:14 | I wouldn't say it's -5 outside actually | |
| 09:15 | imp | @wunder hannover germany |
| 09:15 | munin | imp: The current temperature in Hannover, Germany is -4.0�C (9:50 AM CET on December 16, 2009). Conditions: Clear. Humidity: 93%. Dew Point: -5.0�C. Windchill: -6.0�C. Pressure: 29.92 in 1013 hPa (Steady). |
| 09:16 | imp | think Ropuch wins :D |
| 09:20 | Ropuch | I'd rather not ;-) |
| 09:20 | It's still cold - be it -4 or -6 ;> | |
| 09:21 | sivab left #koha | |
| 09:21 | imp | true... my bicycle saddle was frozen ;) |
| 09:23 | CGI197 joined #koha | |
| 09:24 | CGI197 | I have installed koha-3.00.04_fixed on debian-lenny, succefully |
| 09:24 | but z39.50 is not working, It show 'Results Connection failed to z3950.loc.gov nothing found. Try another search' | |
| 09:25 | wht is the problem can any body help me | |
| 09:27 | koncom joined #koha | |
| 09:31 | koncom | Have a CDS/ISIS iso file that I edited with markedit but koha fails to inport the records;where could I have gone wrong |
| 09:35 | the CDS/isis fie is 2.72mb " about 6000 records | |
| 09:36 | can send file for analysis | |
| 09:37 | Is anybody willing to assist? | |
| 09:47 | CGI197 | is any one there? |
| 09:47 | . | |
| 09:47 | I have some prob | |
| 09:58 | nahuel | :) |
| 09:58 | somebody is here :) | |
| 09:59 | koncom, CDS/ISIS have a really strange format, and they don't use MARC21 as I know... You should convert records to MARC21 | |
| 09:59 | CGI197, have you a firewall ? | |
| 09:59 | or proxy ? | |
| 09:59 | or anything that can block connexions | |
| 10:17 | koncom | Nahuel how do I convert the records to marc21 |
| 10:23 | kf | koncom: you can use a tool like marcedit to convert data to marc21 |
| 10:24 | koncom: there is some information in the wiki about CDS/ISIS and koha http://wiki.koha.org/doku.php?[…]1-5_to_koha_2-x&s[]=isis | |
| 10:33 | paul_p: runtime parameters in reports - great feature! :) | |
| 10:54 | Ropuch | guten Tag :) |
| 10:54 | kf | guten Tag Ropuch :) Wie geht es dir? |
| 10:54 | Ropuch | Danke, gut |
| 11:07 | kf | Ropuch: Wie läuft der Deutsch-Kurs? |
| 11:15 | Amit | heya Kf, nahuel |
| 11:16 | nahuel | hi Amit |
| 11:16 | and all | |
| 11:16 | Amit | nahuel: migration from CDS/ISIS to MARC is very easy |
| 11:16 | nahuel | depends :) |
| 11:17 | Amit | hmm |
| 11:17 | greenmang0_ joined #koha | |
| 11:18 | greenmang0 left #koha | |
| 11:25 | greenmang0_ left #koha | |
| 11:27 | indradg left #koha | |
| 11:27 | greenmang0 joined #koha | |
| 11:28 | greenmang0 | hello everyone ... can anybody mail me /usr/share/koha/opac/cgi-bin/opac/opac-search.pl file? |
| 11:28 | masonj: ^^ | |
| 11:29 | abhishekamberkargmail.com |
|
| 11:29 | hdl_laptop | you can get that on git.koha.org |
| 11:29 | hi | |
| 11:29 | Amit left #koha | |
| 11:30 | masonj | http://git.koha.org/cgi-bin/gi[…]7704359f3;hb=HEAD |
| 11:30 | ;) | |
| 11:34 | greenmang0 | thanks hdl_laptop masonj.. |
| 11:34 | laurence left #koha | |
| 11:34 | greenmang0 | i actually screwed up my original opac-search.pl |
| 11:34 | but new file and original file has lot of differences in code :( | |
| 11:35 | hdl_laptop | you should use dev install for such usage |
| 11:35 | and git | |
| 11:36 | greenmang0 | hdl_laptop: now opac-search isn't working ... i get this in koha-opac-error.log |
| 11:36 | http://paste.debian.net/54168/plain/54168 | |
| 11:37 | hdl_laptop | set debugLevel to 1 and not 2 |
| 11:37 | maybe it is the branch you take that file from which is not your branch. | |
| 11:37 | hb=HEAD => master | |
| 11:37 | hb=3.0.x => 3.0 branch | |
| 11:38 | greenmang0 | hdl_laptop: my koha version is 3.00.01.005 |
| 11:38 | hdl_laptop | should be 3.0 branch then |
| 11:38 | you are way back. | |
| 11:39 | find also the v3.00.01 branch | |
| 11:47 | greenmang0 | thanks hdl_laptop let me check |
| 12:00 | chris_n2 left #koha | |
| 12:05 | greenmang0 | hdl_laptop: can you tell me why do i get this errror? |
| 12:05 | http://paste.debian.net/54168/plain/54168 | |
| 12:21 | nengard joined #koha | |
| 12:27 | tirabo | koncom: I could see the CDS/ISISI ISO file |
| 12:30 | greenmang0 left #koha | |
| 12:34 | greenmang0 joined #koha | |
| 12:35 | jwagner joined #koha | |
| 12:40 | Ropuch left #koha | |
| 12:47 | tirabo left #koha | |
| 12:51 | jdavidb joined #koha | |
| 12:52 | tirabo joined #koha | |
| 12:58 | hugo joined #koha | |
| 12:58 | hugo | Hello |
| 12:59 | I've got a question about importing patron records | |
| 12:59 | The old program or library was using (Library World) seems to have exported the patron list as a Marc file | |
| 13:00 | nahuel | ^^ |
| 13:00 | hugo | is it straightforward to get this into Koha? On my first attempt it looked as if Koha was expecting a csv file... |
| 13:00 | nahuel | you should write a perl script |
| 13:00 | using the koha's API | |
| 13:01 | jwagner | Is it a flat file with MARC tags? Or a true MARC format record? |
| 13:02 | hugo | I don't know enough about Marc (this is all new to me!) to know if it's a flat file or a true MARC record. I'd guess flat - looks like a text file basically. |
| 13:03 | jwagner | If you can open it in a text editor, it's a flat file. |
| 13:03 | hugo | yes, it's flat then. |
| 13:04 | jwagner | Then you should be able to write something as nahuel suggests, to parse the contents and put them into the format Koha is expecting. |
| 13:05 | In the staff client, under Tools, Import Patrons, you can download a sample .csv file to see the format Koha wants. Then massage your data to fit. | |
| 13:06 | IrmaCalyx joined #koha | |
| 13:09 | hugo | Ah - OK, thank you. I will try that. I was hoping there was some way, since Koha seems to be fine with book records in MARC format, that it would do something nifty with a patron file in MARC records too. |
| 13:17 | tomascohen joined #koha | |
| 13:26 | schuster joined #koha | |
| 13:28 | owen joined #koha | |
| 13:30 | schuster | If it truely is a MARC file you could use MarcEdit to extract info into a text file to import into koha as well. |
| 13:32 | jwagner left #koha | |
| 13:35 | hugo left #koha | |
| 13:39 | hugo joined #koha | |
| 13:40 | hugo | Oh, right. I will try MarcEdit. Thank you. |
| 13:42 | hugo left #koha | |
| 13:46 | greenmang0_ joined #koha | |
| 13:56 | Ropuch joined #koha | |
| 13:56 | Ropuch | Hello again |
| 13:57 | owen | Hi Ropuch and everyone |
| 14:08 | hugo joined #koha | |
| 14:11 | schuster | Looking for opinions... We have had instances mainly between 8-9 in the morning when the system is overloaded that items are not getting checked in. The librarians assure me they see ALL the titles come up on the screen. My only thought is that I'm having IO issues. |
| 14:12 | hugo left #koha | |
| 14:13 | schuster | What are my best options to assist with this problem? More Memory? I'm running a Dell PowerEduge Smart 2950 III Quad Core Intel Xeon 2.5 GHz(2 processors), with 16 GB memory |
| 14:14 | Between 7:45 and 9:30 in the morning my system usage doing a top goes from 1 to 7, I've seen it go to 12 for the average load 1 minute reading. | |
| 14:39 | jdavidb | schuster: I've got your koha-devel email in front of me, too. I would be really shocked if you were memory or CPU bound. |
| 14:39 | Even as busy as you are, that memory/CPU pairing should be a-plenty. | |
| 14:40 | koncom left #koha | |
| 14:41 | greenmang0 left #koha | |
| 14:41 | jdavidb | If you are IO bound, which is what I suspect, there are solutions, but none are quick flip-a-switch fixes. I don't remember your configuration that precisely, but I seem to remember lots of stuff getting put on one big filesystem. |
| 14:41 | greenmang0 joined #koha | |
| 14:43 | jdavidb | moving mysql's storage (usually /var/mysql) onto a separate drive or separate controller would possibly help. Moving Zebra away in a similar fashion may also be helpful. |
| 14:45 | I don't know why an IO binding problem would cause data to not be getting updated, though; that's something really odd. An IO overload would make things *slow*, but it'd still work. Make sense? | |
| 14:47 | schuster | Yes it does make sense, but I'm just trying to figure out the best way to avoid *SLOW* |
| 14:48 | owen | Wait... So *are* there situations where a check-in would appear to occur but really hadn't? |
| 14:48 | jdavidb | I remember that little data center you've got there, schuster. during these peak loads, take a listen really close to the server; if you hear a lot of clitter-clatter and chattering noises from the drives, then you know there's a crapload of IO work going on. There's *always* gonna be some, but seek operations are pretty costly, time wise. |
| 14:48 | schuster | goes to closet to listen |
| 14:49 | Nate joined #koha | |
| 14:49 | arturo8a joined #koha | |
| 14:49 | jdavidb | owen: from his description, that seems to be the case. I can't imagine how, though. |
| 14:50 | Nate | Hello All! |
| 14:50 | jdavidb | Hi, Nate. |
| 14:50 | Nate | hi jdavidb! |
| 14:52 | arturo8a | morning |
| 14:53 | schuster | lots of green flickering... 146 GB 10,000RPM SCSI 3 GBps drives RAID with 6 drives in all |
| 14:54 | owen - that's what I'm trying to avoid, but my librarians are swearing they are seeing all the titles come up on the screen - and at this point I'm leaning toward believing them since it is multiple schools | |
| 14:56 | All in all we are pretty happy with Koha - and we have been tweaking things to make it even better for us(setup wise) so this has been a happy migration overall. | |
| 14:56 | jdavidb | Hm. Even 10K drives *can* be clobbered by too many seeks, though it takes a good pile of work to do so. |
| 14:58 | rhcl_away is now known as rhcl | |
| 14:58 | jdavidb | If I recall, schuster, all six drives are set up in one herkin' huge RAID 5 set. I would think that would mitigate the seek problem somewhat. |
| 14:58 | Hi, rhcl. | |
| 14:58 | rhcl | Hi hi! |
| 14:59 | jdavidb | schuster: if you don't mind, do a df -k and pastebin it? |
| 15:08 | greenmang0_ left #koha | |
| 15:08 | greenmang0_ joined #koha | |
| 15:19 | greenmang0 left #koha | |
| 15:19 | greenmang0_ left #koha | |
| 15:28 | owen | Bug 3785 |
| 15:28 | munin | 04Bug http://bugs.koha.org/cgi-bin/b[…]w_bug.cgi?id=3785 critical, PATCH-Sent, ---, chrisbigballofwax.co.nz, ASSIGNED, New Install, no maxreserves setting, OPAC holds fail |
| 15:28 | owen | I take it there should be a maxreserves system preference? |
| 15:28 | * owen | doesn't have one |
| 15:31 | pirulo joined #koha | |
| 15:32 | pirulo left #koha | |
| 15:32 | tirabo left #koha | |
| 15:32 | pirulo joined #koha | |
| 15:36 | tirabo joined #koha | |
| 15:38 | pirulo left #koha | |
| 15:38 | imp | http://code.google.com/p/gource/wiki/Screenshots - search on the page for koha :) |
| 15:44 | hugo joined #koha | |
| 15:45 | kf | owen: perhaps its not there because maxreserves are now in smart rules |
| 15:45 | ? | |
| 15:46 | owen | kf: Maybe so. Maybe I'm getting confused by the title of the bug report. |
| 15:48 | CGI197 left #koha | |
| 15:49 | sekjal joined #koha | |
| 15:52 | hugo_ joined #koha | |
| 15:52 | hugo left #koha | |
| 15:52 | hugo_ is now known as hugo | |
| 15:52 | kf | owen: perhaps its fails because there are no rules? (cant test here, just an idea) |
| 15:56 | hugo left #koha | |
| 16:01 | owen | Hmm.... Information in Bug 3864 says I can't set smart rules without a database update patch... |
| 16:01 | munin | 04Bug http://bugs.koha.org/cgi-bin/b[…]w_bug.cgi?id=3864 blocker, PATCH-Sent, ---, chrisbigballofwax.co.nz, ASSIGNED, Cannot place holds in staff client |
| 16:03 | * owen | manually updates, gets smart-rules.pl working |
| 16:04 | owen | Oooh, "clone rules," that one's new to me. |
| 16:04 | kf | owen: saw your bug about unescaped html |
| 16:05 | owen: we add html to opac note by purpose... plz dont kill it | |
| 16:06 | owen | kf: That bug is specifically targeting titles |
| 16:06 | kf | owen: ah, thx :) |
| 16:06 | * owen | finds "clone rules" doesn't work :( |
| 16:07 | kf | owen: r u testing a new installation or an update from 3.0.x? |
| 16:07 | owen | new install |
| 16:07 | kf | ah, ok. we had some problems iwth update, waiting for patches to be approved, so we can try to update again |
| 16:08 | but I have a new installation on my laptop at home I want to use for testing | |
| 16:08 | enableopacsearchhistory (or similar) sys pref is missing there - do you have one? | |
| 16:12 | francharb left #koha | |
| 16:13 | francharb joined #koha | |
| 16:13 | francharb left #koha | |
| 16:13 | francharb joined #koha | |
| 16:14 | francharb left #koha | |
| 16:14 | brendan joined #koha | |
| 16:16 | francharb joined #koha | |
| 16:18 | francharb left #koha | |
| 16:18 | owen | Sorry kf, got a phone call |
| 16:18 | I'm checking my sys prefs now | |
| 16:18 | francharb joined #koha | |
| 16:18 | owen | "EnableOpacSearchHistory" |
| 16:18 | "Enable or disable opac search history" | |
| 16:18 | Type: YesNo | |
| 16:19 | francharb left #koha | |
| 16:20 | francharb joined #koha | |
| 16:20 | jwagner joined #koha | |
| 16:20 | francharb left #koha | |
| 16:22 | kf | owen: ah, strange, will check with my installation at home |
| 16:23 | owen | kf: but this is git install of HEAD, not of 3.0.x |
| 16:23 | kf | yes, mine too |
| 16:23 | owen | Okay, I wasn't sure. |
| 16:24 | kf | no, its good to check this. Perhaps I was just "blind" yesterday |
| 16:31 | Ropuch | It's been a while since HEAD was updated |
| 16:31 | owen | Hmm... still can't place holds. |
| 16:34 | Kivutar left #koha | |
| 16:37 | hdl_laptop | owen: have you applied patches meant to fix that before ? |
| 16:38 | kf | ok, time to go home - bye #koha |
| 16:38 | kf left #koha | |
| 16:39 | owen | hdl_laptop: I saw the patch about updating the issuingrules table |
| 16:43 | hugo joined #koha | |
| 16:47 | arturo8a | hi |
| 16:48 | anyone knows a way to acces koha - admin as a included folder? | |
| 16:48 | that means | |
| 16:49 | http://XXX.XXX.XXX.XXX/admin/ instead of http://XXX.XXX.XXX.XXX:8080/ | |
| 16:51 | owen | arturo8a: That sounds like something that would be possible with some Apache configuration |
| 16:52 | arturo8a: If no one here knows the specifics (I don't) you could ask in an Apache-specific forum | |
| 16:53 | hugo left #koha | |
| 16:54 | bgkriegel joined #koha | |
| 16:55 | hugo joined #koha | |
| 16:55 | indradg joined #koha | |
| 16:56 | hugo left #koha | |
| 16:56 | chris | schuster: you about? |
| 16:59 | hdl_laptop | hi chris |
| 17:00 | chris | hiya hdl_laptop |
| 17:00 | hdl_laptop | already awoken ? |
| 17:01 | chris | yep. have to go to the airport soon |
| 17:02 | owen | Interesting... Looks like you can't clone issuing rules from "default" to a specific library |
| 17:05 | chris | @later tell schuster iotop is a good way to see whats going on |
| 17:05 | munin | chris: The operation succeeded. |
| 17:09 | owen | I take it back...You can't clone issuing rules from "default" only if you start from admin/clone-rules.pl |
| 17:12 | francharb joined #koha | |
| 17:12 | francharb left #koha | |
| 17:12 | francharb joined #koha | |
| 17:16 | francharb left #koha | |
| 17:16 | francharb joined #koha | |
| 17:17 | arturo8a left #koha | |
| 17:17 | hdl_laptop | owen: agreed for search on suggestions. |
| 17:18 | otherwise, we could try and have this as a multiple header just as for authorities. | |
| 17:20 | francharb left #koha | |
| 17:20 | francharb joined #koha | |
| 17:24 | hugo joined #koha | |
| 17:25 | bgkriegel left #koha | |
| 17:35 | wizzyrea_mobile joined #koha | |
| 17:36 | francharb left #koha | |
| 17:43 | owen left #koha | |
| 17:47 | brendan left #koha | |
| 17:48 | owen joined #koha | |
| 18:00 | brendan joined #koha | |
| 18:04 | owen is now known as owen-away | |
| 18:09 | wizzyrea_mobile left #koha | |
| 18:17 | nicomo left #koha | |
| 18:23 | schuster | chris - I don't have iotop. Is that an apt-get option to install? |
| 18:26 | jdavidb around? | |
| 18:27 | * jdavidb | is very round. |
| 18:29 | schuster | no more holiday cookies and punch... |
| 18:45 | nengard | so - yesterday I'm training a library and I notice that there is a 'Notices' tab on the patron record :) does anyone happen to have a populated list from that page they could take a screenshot of and send to me for the manual? |
| 18:49 | schuster | WOW What version are they running! |
| 18:52 | collum joined #koha | |
| 18:57 | nengard | schuster - not them - me -i was using my install of HEAD |
| 18:58 | jwagner | There has been a Messaging tab on the patron record for a while now, which despite the name has been showing notices sent. Sounds like it just got renamed? |
| 18:59 | nengard | jwagner - not i have them both :) |
| 18:59 | not == no | |
| 19:01 | nicomo joined #koha | |
| 19:02 | owen-away is now known as owen | |
| 19:03 | saorge joined #koha | |
| 19:07 | saorge_ left #koha | |
| 19:17 | zico joined #koha | |
| 19:17 | zico | hi |
| 19:17 | owen | Hi zico |
| 19:17 | zico | i mailed in koha mailing list... subject was "koha 3.0.4 + biblio records" |
| 19:18 | but... didn`t get answers!!!! but.. i need it badly | |
| 19:18 | hello owen! | |
| 19:18 | good to see u here | |
| 19:21 | owen | Unfortunately zico I'm not enough of an expert to answer your question. I have not encountered that problem before. |
| 19:22 | I also do not have a 3.0.4 test installation, so I can't try to duplicate your error. | |
| 19:23 | Ropuch | Uh, another 1% of staff translation done |
| 19:25 | zico | owen: is there anyone who can help me? :( |
| 19:25 | I am using koha 3.0.4 under debian 5.0. The problem is in editing records. If we edit any records, after editing, it shows two same records, both are newly edited records. | |
| 19:26 | After that, if we delete one item and if we search for that in OPAC; the error shows: Koha error The following fatal error has occurred: Can't call method "clone" on an undefined value at /usr/share/koha/lib/C4/XSLT.pm line 57. Apache Server version: Apache/2.2.9 (Debian) Server built: Jan 20 2009 17:29:25 Koha 3.00.04.019 Koha DB 3.0004019 MySQL mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using r | |
| 19:26 | this is the whole thing | |
| 19:28 | owen | zico: Do your records contain unusual unicode characters? |
| 19:28 | brendan | zico - which browser are you using? |
| 19:29 | owen | I found this email exchange: http://old.nabble.com/How-to-d[…]r-td26021631.html |
| 19:31 | collum left #koha | |
| 19:32 | zico | owen: what does it means? "unsual unicode characters?"? |
| 19:32 | brendan: firefox | |
| 19:33 | richard joined #koha | |
| 19:33 | richard | hi |
| 19:33 | owen | zico: In what language are most of your records? |
| 19:33 | brendan | zico - thanks - I saw an error before with someone using IE and that caused two records to be put into the database (like your problem) |
| 19:34 | nicomo left #koha | |
| 19:34 | brendan | the fix was to switch to firefox |
| 19:37 | zico | brenden: cannot get your point |
| 19:37 | are you saying that, chaning web browser will solve my problem? | |
| 19:38 | brendan | zico - I think you are fine, it is best to use firefox |
| 19:39 | zico have you filed a bug for your problem? | |
| 19:41 | zico | brendan: how about the second problem? |
| 19:41 | After that, if we delete one item and if we search for that in OPAC; the error shows: Koha error The following fatal error has occurred: Can't call method "clone" on an undefined value at /usr/share/koha/lib/C4/XSLT.pm line 57. Apache Server version: Apache/2.2.9 (Debian) Server built: Jan 20 2009 17:29:25 Koha 3.00.04.019 Koha DB 3.0004019 MySQL mysql Ver 14.12 Distrib 5.0.51a, for debian-linux-gnu (i486) using r | |
| 19:42 | owen | zico: The errors appears on the search results page, or on the detail page for the title you clicked on from the results page? |
| 19:42 | nengard left #koha | |
| 19:45 | tomascohen left #koha | |
| 19:45 | zico | owen: search results page |
| 19:46 | owen | zico: Do you have the XSLTResultsDisplay system preference turned on? |
| 19:46 | If so, try turning it off. I'd be interested to know if you get a similar error. | |
| 19:47 | zico | owen: i don`t think that.. i did it! i mean.. disable XSLTResultsDisplay |
| 19:48 | sekjal | zico: looks like a Zebra issue to me. |
| 19:48 | are you running Zebra, and if so, what flags are you using with your cronjob? | |
| 19:49 | zico | sekjal: i am using this in cron |
| 19:49 | */1 * * * * KOHA_CONF=/etc/koha/koha-conf.xml PERL5LIB=/usr/share/koha/lib /usr/share/koha/bin/migration_tools/rebuild_zebra.pl -b -z >/dev/null | |
| 19:51 | sekjal | hmmm.... that looks fine, though its more frequent than mine... |
| 19:53 | zico | hey... some days ago... i faced same problem in koha-3.0.1 |
| 19:53 | someone answered this problem with | |
| 19:54 | "stop zebraqueue and run rebuild_zebra.pl -a -b -r | |
| 19:54 | i did it now in new koha...but... it hasn`t solved | |
| 19:56 | collum joined #koha | |
| 19:57 | hugo left #koha | |
| 19:58 | CGI547 joined #koha | |
| 19:59 | CGI547 left #koha | |
| 19:59 | sekjal | zico: I believe the -r flag got change to -reset for rebuild_zebra.pl between 3.0.1 and 3.0.4 |
| 19:59 | nicomo joined #koha | |
| 19:59 | sekjal | perhaps trying the full reindex again with rebuild_zebra.pl -b -reset |
| 20:00 | hugo joined #koha | |
| 20:04 | richard left #koha | |
| 20:06 | zico | sekjal: full reindex with rebuild_zebra.pl -b -reset? |
| 20:08 | sekjal | did the recommendation to run rebuild_zebra.pl -a -b -r work for your problem with 3.0.1? |
| 20:08 | if so, you'd need to change that to rebuild_zebra.pl -a -b -reset to work in 3.0.4, I believe | |
| 20:11 | hugo left #koha | |
| 20:14 | zico | sekjal: :) |
| 20:15 | sekjal: will rebuild_zebra.pl -a -b -reset works? is there any difference between -r & -reset? | |
| 20:15 | sekjal | -r is the older flag, and -reset is the current flag. I'm not sure why it changed; the documentation doesn't reflect it |
| 20:16 | nicomo left #koha | |
| 20:17 | sekjal | but the code I've pulled from Git doesn't recognize -r anymore, so the change must have occurred at some point... |
| 20:18 | schuster | git question - so I have 3.01.00.002 on this computer in my office and I just did a git clone git://git.koha.org/pub/scm/koha.git kohaclone |
| 20:20 | if i cd kohaclone - then git checkout -b mywork origin - when I log into koha will I be seeing the clone or how do I get to that point for testing 3.2? or do I have to do something totally different? | |
| 20:20 | Ropuch | The repo you cloned is current HEAD |
| 20:22 | owen | schuster: Where is 3.0.1.00.002 installed? Was that a standard installation? |
| 20:23 | schuster | standard install |
| 20:25 | Ropuch | HEAD install (with en only) is so fast ;> |
| 20:26 | owen | schuster: And are you wanting to preserve your 3.01.00.002 installation for testing? |
| 20:28 | zico left #koha | |
| 20:30 | zico joined #koha | |
| 20:31 | zico left #koha | |
| 20:35 | jdavidb left #koha | |
| 20:44 | chris | back |
| 20:50 | Ropuch | wb chris |
| 20:58 | chris | thanks |
| 21:01 | owen | Here's an error from my log I've never seen before: "Extra content at the end of the document" |
| 21:02 | chris | heh thats a new one |
| 21:02 | collum | Sounds like an XML error |
| 21:03 | owen | Oh yeah, I missed the beginning of the line of that error: " :9: parser error : Extra content at the end of the document" |
| 21:03 | chris | yeah so </xml> then some other stuff |
| 21:03 | good catch collum | |
| 21:03 | owen | I'm assuming it's related to this one: "addorder.pl: Indicator in 952 is empty at /home/oleonard/kohaclone/C4/Biblio.pm line 1836" |
| 21:04 | Which I think occurred because I tried to add an item along with a new order, an item with no barcode. | |
| 21:04 | (at least going back and adding a barcode number made it work) | |
| 21:07 | brendan left #koha | |
| 21:08 | indradg left #koha | |
| 21:09 | Nate left #koha | |
| 21:10 | collum | chris: thanks. And with that it's time to go home. |
| 21:10 | collum left #koha | |
| 21:12 | sekjal left #koha | |
| 21:15 | owen | Me too! |
| 21:15 | owen left #koha | |
| 21:17 | schuster | owen - thanks - got called a way for a phone call. This is on a test server so I dont' care about maintaining anything. |
| 21:18 | Ah drat just missed him. | |
| 21:18 | bgkriegel joined #koha | |
| 21:21 | schuster | So I'll ask again. I have a Koha folder running 3.01.x and last night I pulled HEAD onto the same box into a kohaclone folder. When I launch Koha now it takes me to 3.01. |
| 21:21 | tirabo | hi bgkiegel |
| 21:21 | schuster | If I want to work with 3.2 what do I need to do? |
| 21:21 | bgkriegel | tirabo: hi |
| 21:21 | schuster | create a branch? This is a play system so if something gets messed up that's ok. |
| 21:22 | tirabo left #koha | |
| 21:28 | Ropuch | schuster: you can install all optional data in web install |
| 21:28 | Sample branches, patrons, itemtypes & other things included | |
| 21:36 | tirabo joined #koha | |
| 21:47 | arturo8a joined #koha | |
| 21:54 | arturo8a left #koha | |
| 21:55 | tirabo left #koha | |
| 22:15 | brendan joined #koha | |
| 22:17 | brendan left #koha | |
| 22:44 | jwagner left #koha | |
| 22:50 | schuster | OK I'm a nuckle head duh... thanks |
| 22:50 | schuster left #koha | |
| 22:54 | bgkriegel left #koha | |
| 23:00 | hugo joined #koha | |
| 23:13 | hugo left #koha | |
| 23:39 | hugo joined #koha |
← Previous day | Today | Next day → | Search | Index
